-250x250.jpg)
Click Image for Gallery
Groom Lake Pro + USB-C Right Angle to USB-C Tether Cable 4.6m/15ft
The Pro+ Collection
Tight Right Angle design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
300lb rated crush-proof metal housing
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)
60-day cable failure guarantee
Commonly paired with;
Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m/31ft
Skylab XL PRO+ USB-C Female to USB-A 3.0 Extension Cable 9.5m/31ft
To create a Power Bridge for 62ft tethering you must follow the below steps;
1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.
If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.
Compatible with any camera using a USB-C port including, but not limited to;
The Pro+ Collection
Tight Right Angle design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
300lb rated crush-proof metal housing
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)
60-day cable failure guarantee
Commonly paired with;
Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m/31ft
Skylab XL PRO+ USB-C Female to USB-A 3.0 Extension Cable 9.5m/31ft
To create a Power Bridge for 62ft tethering you must follow the below steps;
1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.
If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.
Compatible with any camera using a USB-C port including, but not limited to;
SONY A-1
SONY A7R4
SONY A7R III
NIKON Z6II
NIKON Z7II
LUMIX S1
LUMIX S1R
FujiFilm GFX 100
CANON R5 **must use the latest Canon firmware from Canon.com**
We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.
SONY A7R4
SONY A7R III
NIKON Z6II
NIKON Z7II
LUMIX S1
LUMIX S1R
FujiFilm GFX 100
CANON R5 **must use the latest Canon firmware from Canon.com**
We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.
