-250x250.jpg)
Click Image for Gallery
Murcia PRO+ Phase One USB-B to USB-C Tether Cable 3.6m/12ft
The Pro+ Collection
Commonly paired with Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m/31ft to tether up to 43ft!
Tight connection design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 43ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)
To create a Power Bridge for 43ft tethering you must follow the below steps;
1) Computer-end must be plugged in first
2) Then plug in the USB-B into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.
If this order of steps is not followed, you will not properly connect at 43ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.
Compatible with most cameras using a USB-B port including, but not limited to;
Phase One IQ
Phase One IQ1
Phase One IQ2
Phase One IQ3
We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.
The Pro+ Collection
Commonly paired with Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m/31ft to tether up to 43ft!
Tight connection design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 43ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)
To create a Power Bridge for 43ft tethering you must follow the below steps;
1) Computer-end must be plugged in first
2) Then plug in the USB-B into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.
If this order of steps is not followed, you will not properly connect at 43ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.
Compatible with most cameras using a USB-B port including, but not limited to;
Phase One IQ
Phase One IQ1
Phase One IQ2
Phase One IQ3
We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.