Skylab XL PRO+ USB-C Female to USB-A 3.0 Extension Cable 9.5m/31ft

The Pro+ Collection

Tight Right Angle design to ensure a stable tether connection

Uses our new hybrid-optic technology

High speed with even faster transfer speeds

300lb rated crush-proof metal housing

IPX4 weather sealed

Power bridge chipset allows for an outstanding, stable 62ft connection

Slimmer, stronger soldered connectors

Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.

No power injection points (No need!)

60-day cable failure guarantee

To create a Power Bridge for 62ft tethering you must follow the steps below: 

1) Computer-end must be plugged in first

2) Then plug in the ANGLED USB-C into the camera and power the camera on

3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.

If this order of steps is not followed, you will not properly connect at 62ft. If you power down the camera or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

Compatible with but not limited to any camera using a USB-C port including, but not limited to: 

SONY A7R4

SONY A1

SONY A7R III

NIKON Z6

NIKON Z7

LUMIX S1

LUMIX S1R

PHASE ONE IQ4

NIKON D810

NIKON D850

CANON 5DSR

CANON MK4 *must run the latest Canon MK4 firmware from Canon.com

CANON R5 *must use Canon firmware 1.4.0 or higher*

FUJI GFX 100**

AREA51 TETHER CO. cables focus on extreme speed industrial quality cables, featuring premium connectors and superior insulation. Our cables are rigorously tested to ensure reliable and stable connections, so you can focus more on your close encounters and unexplained phenomena.